Composition | AISI 316L stainless steel body |
Power supply | 24 Vdc (10 ÷ 35 Vdc) current loop 4 ÷ 20 mA (2 wires) |
External connections | MIL-C-5015 2 poles connector (conductors max section 2,5 mm²) |
| 4 poles M12 connector |
Environmental | - 60°C ÷ + 120°C |
| IP 65 EN 60529/10.91 standards |
Measure type | Omnidirectional seismic (absolute vibration) |
Dynamic field | ± 18 g |
Transverse sensitivity | < 5 % |
Linearity | ± 2% - 75 Hz |
Dynamic performances | ±3% / 10Hz – 1kHz - see Figure 2 |
| -3db / 1.5Hz – 2.5kHz |
Insulation | ≥108 Ω between signal and container |
Application axis | Any |
Standard machine connection thread | M8x1,25 |
| ¼”-18NPT |
| ¼’’-28UNF |
| M6x1 |
Maintenance | No maintenance is needed |
Electrical connections | Bipolar shielded cable, conductors typical section 2x1mm² |
Parameters to be defined when ordering | Measuring field - Machine connection thread - Certification - Connection |
Mounting torque | 5÷10 N-m |
Certification available | Ex II 2 G Ex ia IIC T6, T5, T4 Gb (ATEX) - Ex ia IIC T6, T5, T4 Gb (IECEx) |